Gpz7000 20" coil
+4
Gary Mc
Pilbara snapper
nightjar
Trashfinder
8 posters
Page 1 of 1
Gpz7000 20" coil
Alright I've been waiting for someone to start a discussion about the rumours of the coil for the Zed, I have a few questions so I thought I'd put it out there.
I've been waiting for Minelab to release new coils for the 7k. Any word on a release date? Will it punch deeper? Will I have to go over ground I've already covered? The weight doesn't bother me but I've heard it' will be made with hollow wires in the coil to keep the weight down to similar with the 14"????? Are Minelab also looking at smaller sizes?
Ray, are you going to have a tester in the shop for us to try before parting with our cash?
Forgive me if these are simple sounding questions, I just thought someone should start the discussion
I've been waiting for Minelab to release new coils for the 7k. Any word on a release date? Will it punch deeper? Will I have to go over ground I've already covered? The weight doesn't bother me but I've heard it' will be made with hollow wires in the coil to keep the weight down to similar with the 14"????? Are Minelab also looking at smaller sizes?
Ray, are you going to have a tester in the shop for us to try before parting with our cash?
Forgive me if these are simple sounding questions, I just thought someone should start the discussion
Trashfinder- Posts : 2
Join date : 2015-05-23
Age : 46
Re: Gpz7000 20" coil
Trashfinder, Is this all hearsay or did you get the information from a Minelab official?
Waste of time discussing rumours.
Waste of time discussing rumours.
nightjar- Posts : 254
Join date : 2015-04-04
Age : 94
Re: Gpz7000 20" coil
Fair point Nightjar, been hearing about it for a little while now. Just excited about a new option for the 7k.Thought someone more learned than I might know something
Trashfinder- Posts : 2
Join date : 2015-05-23
Age : 46
Re: Gpz7000 20" coil
It's more than rumours, minelab are working on a new 19 " to 20 " coil for the GPZ 7000, that has been stated on Steve hershbacks forum in the USA , Steve is one person in this game that gets it right most times
Regards snapper
Regards snapper
Pilbara snapper- Posts : 49
Join date : 2015-10-29
Age : 67
Re: Gpz7000 20" coil
No worries I'll stick the 24"DD back on the 2200 for some weight training
Gary Mc- Posts : 51
Join date : 2015-04-29
Age : 55
Re: Gpz7000 20" coil
Posted 28 February
Gary Schafer of Minelab America announced today at the GPAA Las Vegas Show that a 19" - 20" coil is officially in the works. Great effort and therefore time are going into trying to keep this coil as close to the weight of the stock 14" x 13" coil as is absolutely possible. No projected time frame for release was announced but since they are still hard at work in it the implication was not any time super soon. Sorry, wish I had more than that to offer but at least you know now a big coil will happen before a small coil
that was an insert from Steves forum
just cant wait for the new coil and YES will have a test coil HOPEFULLY if Minelab offer me one to kick it along...here's hoping.
regards
oneday
Posted 28 February
Gary Schafer of Minelab America announced today at the GPAA Las Vegas Show that a 19" - 20" coil is officially in the works. Great effort and therefore time are going into trying to keep this coil as close to the weight of the stock 14" x 13" coil as is absolutely possible. No projected time frame for release was announced but since they are still hard at work in it the implication was not any time super soon. Sorry, wish I had more than that to offer but at least you know now a big coil will happen before a small coil
that was an insert from Steves forum
just cant wait for the new coil and YES will have a test coil HOPEFULLY if Minelab offer me one to kick it along...here's hoping.
regards
oneday
oneday- Admin
- Posts : 1704
Join date : 2015-02-27
Age : 67
Location : karratha
Re: Gpz7000 20" coil
Sounds good Ray,
I'll look forward to having a bit more ground coverage when searching the open areas.
It will be interesting to see how the target, size / depth / signal response is with the 20"
Cheers
Gary
I'll look forward to having a bit more ground coverage when searching the open areas.
It will be interesting to see how the target, size / depth / signal response is with the 20"
Cheers
Gary
Gary Mc- Posts : 51
Join date : 2015-04-29
Age : 55
Re Gpz 7000 20'' coil
About time I can not wait.
Does it come with a ferrite the size of a doughnut.
Let the big coils roll.
Does it come with a ferrite the size of a doughnut.
Let the big coils roll.
Justdoit- Posts : 9
Join date : 2015-05-30
Age : 45
Location : Port Hedland
Re: Gpz7000 20" coil
If it's any interest to you, Fletcher from ML, at our prospectors meeting in gero last week, stated they would be bringing out an approx 20" lightweight eliptical for the z before July.
And they would be doing a deal for those that paid 10.7k for the z.
Cheers
Brett
And they would be doing a deal for those that paid 10.7k for the z.
Cheers
Brett
mulgadansa- Posts : 41
Join date : 2015-03-31
Age : 71
Re: Gpz7000 20" coil
mulgadansa wrote
If it's any interest to you, Fletcher from ML, at our prospectors meeting in gero last week, stated they would be bringing out an approx 20" lightweight eliptical for the z before July.
And they would be doing a deal for those that paid 10.7k for the z.
Cheers
Brett
wot sort of a deal brett any ideas
cheers the speciman
If it's any interest to you, Fletcher from ML, at our prospectors meeting in gero last week, stated they would be bringing out an approx 20" lightweight eliptical for the z before July.
And they would be doing a deal for those that paid 10.7k for the z.
Cheers
Brett
wot sort of a deal brett any ideas
cheers the speciman
the speciman- Posts : 294
Join date : 2015-06-24
Age : 64
Location : ktown
Similar topics
» GPZ7000 covers
» 19" coil orders--14TH NOVEMBER
» For sale GPZ7000 SOLD!
» new coil for the GPZ
» New 14" coil
» 19" coil orders--14TH NOVEMBER
» For sale GPZ7000 SOLD!
» new coil for the GPZ
» New 14" coil
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Tue 17 Dec 2019, 3:33 pm by wandwaver
» GPZ 19” Coil For Sale
Mon 16 Dec 2019, 5:24 am by Matrix
» gold mining site and gold bars to sell
Thu 27 Sep 2018, 2:03 am by johngolden
» G'day everyone
Tue 25 Sep 2018, 8:21 pm by Moneybox
» Kia Ora form Martin
Tue 14 Aug 2018, 4:08 pm by oneday
» New Member
Wed 01 Aug 2018, 9:31 pm by Fluffy
» I need some help with detecting in WA
Mon 23 Jul 2018, 11:15 am by Guest
» SDC2300 reluctant sale
Sat 26 May 2018, 9:21 am by goldfinger
» Gold & Ghosts - Volumes 1&2
Tue 08 May 2018, 5:09 pm by nightjar