Latest topics
» V8 landcruiser manual and Li jumpstarter
Yesterday at 6:17 am by boobook

» GOLD MONSTER --IN STOCK
Mon 26 Jun 2017, 4:47 pm by oneday

» GPX 5000-DEMO
Thu 22 Jun 2017, 1:55 am by oneday

» DMP Pow - S
Tue 13 Jun 2017, 7:41 am by 309mining

» gpx 4500 HEAPS GEAR--UNDER OFFER
Fri 09 Jun 2017, 7:52 pm by Wedgetail

» old shaker bucket
Thu 01 Jun 2017, 9:02 pm by goldfinger

» gpx 5000 4 x SOLD SOLD
Wed 19 Apr 2017, 8:19 am by oneday

» wanted 2nd hand gold cube-ACQUIRED
Fri 14 Apr 2017, 9:04 am by oneday

» GPX 5000 4 sale--SOLD SOLD
Wed 05 Apr 2017, 7:25 am by oneday

Pilbara Prospecting Supplies Karratha
Troy Oz Gold Safaris

New 14" coil

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Go down

New 14" coil

Post by oneday on Mon 30 Mar 2015, 8:10 pm

there will be a new concept 14" coil coming out in April hopefully in the first couple of weeks which is claimed to penetrate deeper than existing coils on the market currently.

I have ordered 12 new ELITE COILS for punters that r trying to sniff deeper gold out which are suited to the GPX and earlier detectors, without hanging themselves trying to buy a GPZ.

Will have a couple of test coils if u r in Ktown.

will keep members informed..

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by Banjo on Mon 30 Mar 2015, 8:43 pm

Ray, any news as to whether they will be offering different size coils in the new format ?
avatar
Banjo

Posts : 223
Join date : 2015-03-25
Location : Hedland

Back to top Go down

Re: New 14" coil

Post by oneday on Mon 30 Mar 2015, 8:47 pm

have to wait and see how this one goes and if all reports come in favourable then I would say there will b a limited release of different sizes.

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by mulgadansa on Tue 31 Mar 2015, 8:49 am

Gday Ray
Do you know if these are along the lines of the triple wound Super D coil on the Z, or just a better mono?
cheers
Brett
avatar
mulgadansa

Posts : 41
Join date : 2015-03-31
Age : 64

Back to top Go down

Re: New 14" coil

Post by goldfinger on Tue 31 Mar 2015, 9:15 am

i have only picked up bits and pieces about this coil brett, seems it has better emi protection and designed similar to the zed's coil giving it some good punching power and reduced lightning/electronic interference. i should have one fairly soon and will write up a report on how it goes.
cheers
Martin
avatar
goldfinger
Admin

Posts : 306
Join date : 2015-03-25
Age : 54
Location : Northampton

Back to top Go down

Re: New 14" coil

Post by mulgadansa on Tue 31 Mar 2015, 9:48 am

Bewdy Martin, less emi will be mint.
cheers
Brett
avatar
mulgadansa

Posts : 41
Join date : 2015-03-31
Age : 64

Back to top Go down

Re: New 14" coil

Post by oneday on Tue 31 Mar 2015, 12:53 pm

WHAT I CAN TELL U IS that its a mono with Litz wiring in a different configuration to the rest of the Frisbees.

have a test coil coming this week so look out....

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by Ismael on Tue 31 Mar 2015, 10:18 pm

oneday wrote:WHAT I CAN TELL U IS that its a mono with Litz wiring in a different configuration to the rest of the Frisbees.

have a test coil coming this week so look out....

regards
oneday

Hi Ray, appreciate any updates ,might be interesting to try on the detector I told you about when we spoke the other day that I have modded...
avatar
Ismael

Posts : 9
Join date : 2015-03-28

Back to top Go down

Re: New 14" coil

Post by oneday on Wed 01 Apr 2015, 6:51 am

Hi Ismael

They r pretty confident with its performance, thus the production phase.

As soon as I get one I'll let u know and u can take it for a test drive.

Hoping to get 2 demo coils but will wait and see what they have sent me.

Mind u we r still waiting for the picks to roll up x east.

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by Twodogs on Wed 01 Apr 2015, 7:17 am

Be spew'n if this makes the 4500/5000 punch 40% deeper haha. 10700 on a new machine and only needed a coil,,,,,,, unless it's a 4 grand coil Very Happy Very Happy
avatar
Twodogs

Posts : 10
Join date : 2015-03-26

Back to top Go down

Re: New 14" coil

Post by oneday on Thu 02 Apr 2015, 8:06 am

i'll sell it for 4k --just to u so u don't feel out of love-sorry pocket. lol!

to test it u will need 2 x 5k both with 14" coils to be sure.

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by oneday on Thu 02 Apr 2015, 7:23 pm

couple of pics--
she will be out on the test paddock to see if it does detect a lot quieter than regular Mono coils.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]

wait and see game now.

regards
oneday
avatar
oneday
Admin

Posts : 1612
Join date : 2015-02-27
Age : 61
Location : karratha

Back to top Go down

Re: New 14" coil

Post by Madmav on Thu 02 Apr 2015, 8:45 pm

Have been informed it is due for release end of April, is this right ?, keep me one m8 if it lives up to your tests, just let me know how much and I will deposit it as soon as they are available,
Thanks
Happy hunting
avatar
Madmav

Posts : 11
Join date : 2015-04-01
Age : 57
Location : WA somewhere

Back to top Go down

Re: New 14" coil

Post by flyrock on Sun 05 Apr 2015, 7:47 pm

Hey Ray
Any feedback on the new elite mono?
If any good, might get you to airbag me one before I head out next Monday.
Cheers Phil
avatar
flyrock

Posts : 24
Join date : 2015-03-29
Location : WA

Back to top Go down

Re: New 14" coil

Post by reefdog70 on Mon 06 Apr 2015, 1:04 am

Just a quick bit of feedback on the new coil from today.

2 small bits on some well worked ground and plenty of steel slithers. I was quite surprised by how sensative the coil was.
I run the 2300 over the faintest target I got all day and it picked it up easily. That ended up being a piece of gold half the size of a match head 2 inches down. I was impressed for a 14 inch coil all the same.

I never got to dig anything deeper than 6 inches and all the targets were loud and clear even though they were rubbish.

There was quite a lot of EMI later in the afternoon but a retune seemed to settle things down. It was quieter then the standard 11 mono when I gave it a try though.

The coil was not bump sensative at all.

I messed around with lots of settings and ended up with these. Running the coil in normal had way too much ground noise for me and when it was swung close too or rubbed on the ground it sounded like I had a target. Messed with my head so dummed the 5000 down a little.

General
Special
Fixed
Special fine gold
Slow
Rx14
stabiliser 8

I will give it a go again tomorrow in some different ground and hopefully dig a decent hole! Ktown will have the 7000 to compare with and he knows the 5000 from back to front.

Stay tuned.














reefdog70

Posts : 20
Join date : 2015-03-26
Location : Dampier

Back to top Go down

Re: New 14" coil

Post by Madmav on Mon 06 Apr 2015, 8:05 am

Reef dog appreciate the update on performance, very keen to follow these reports
Keep it up and happy hunting
Steve and Buddy
avatar
Madmav

Posts : 11
Join date : 2015-04-01
Age : 57
Location : WA somewhere

Back to top Go down

Re: New 14" coil

Post by Banjo on Mon 06 Apr 2015, 8:56 am

Thanks for the feedback Reefdog Smile
avatar
Banjo

Posts : 223
Join date : 2015-03-25
Location : Hedland

Back to top Go down

Re: New 14" coil

Post by goldfinger on Mon 06 Apr 2015, 11:43 am

cheers Reefdog. the coil sounds like it is doing its job, less EMI must result in more targets and therefore more gold.
good work
martin
avatar
goldfinger
Admin

Posts : 306
Join date : 2015-03-25
Age : 54
Location : Northampton

Back to top Go down

Re: New 14" coil

Post by Wedgetail on Mon 06 Apr 2015, 3:27 pm

Hmmm,,,,,,,,,After spending 10.7k dollars on a GPZ 7000, I'm not sure I'm enjoying this news about a new "sooper dooper" coil for the 5000!!

I've got a 5000 (as well as the new 7000) but I'm gonna be a tad pissed off if this coil makes a 5000 "40%" deeper than standard 5000 - for just another "four thousand dollars",,,,,,,,,,or even less!

This is gonna be interesting Ray!
avatar
Wedgetail

Posts : 590
Join date : 2015-03-26

http://www.australiangoldsafaris.com/

Back to top Go down

Re: New 14" coil

Post by k town swinger on Mon 06 Apr 2015, 8:11 pm

Reefdogs computer is playing up so he sent this through to post and from the limited time seeing this coil in action on hot ground it looks the goods.

We gave the coil a work out at the most well known "Patch"  not far from karratha today. This area has seen every detector known to man over the last few years.

We tested a number of targets found by the sdc and 7000 to see how the Elite went on the 5000.

Changed a couple of settings from yesterday, upped the stabiliser to 10 and gain to 15.

The coil run quite in some of the noisiest ground around but was easily effected by train noise and emi spikes that also effected all our other detectors today.

Signal clarity on any target was very good and like yesterday it picked up surprisingly small targets for a 14inch coil.

Highlight for the day was a nice target picked up by Ktown on the 7000. We run the elite over the undug target and clearly could pick up a signal. We continued using the elite and unearthed  a nice speci from a depth of over 12 inches. The depth and signal response was a welcome surprise for both of us.
[You must be registered and logged in to see this image.]
[You must be registered and logged in to see this image.]
Targeting was no issue with this coil but we did notice that the most sensitive areas of the coil were from 8 to 11 and 1 to 4 O'clock.

Is this the answer for all us GPX owners who are not ready to part with the cash and upgrade?

I am not sure yet! It is a damm good coil from what we have seen so far.

I dont think its going to make my 5000 magically transform into a 7000!

Will I buy one?

Yes!

k town swinger

Posts : 43
Join date : 2015-03-26

Back to top Go down

Re: New 14" coil

Post by Banjo on Mon 06 Apr 2015, 8:47 pm

Sounding better and better all the time Smile

Thanks for taking the time to put the coil through it's paces, certainly look's the goods especially hearing that from a couple of operators like yourselves Cool

cheers
avatar
Banjo

Posts : 223
Join date : 2015-03-25
Location : Hedland

Back to top Go down

Re: New 14" coil

Post by reefdog70 on Mon 06 Apr 2015, 9:14 pm

Thanks for posting Ktown, got it sorted now I think.....

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]

[You must be registered and logged in to see this image.]

reefdog70

Posts : 20
Join date : 2015-03-26
Location : Dampier

Back to top Go down

Re: New 14" coil

Post by goldfinger on Mon 06 Apr 2015, 9:23 pm

thats a great result from a flogged patch reefdog, thanks for the update and pics. mine should arrive this week and i will be taking her to some good ground if i can get there. cant wait to try it out.
avatar
goldfinger
Admin

Posts : 306
Join date : 2015-03-25
Age : 54
Location : Northampton

Back to top Go down

Re: New 14" coil

Post by Madmav on Mon 06 Apr 2015, 9:44 pm

Thanks for the effort and updates guys, sounding more and more like a coil to have in the arsenal

Happy hunting
Steve and Buddy
avatar
Madmav

Posts : 11
Join date : 2015-04-01
Age : 57
Location : WA somewhere

Back to top Go down

Re: New 14" coil

Post by Coiltek on Wed 15 Apr 2015, 10:48 am

Hi All, Glad to be a part of the forum...

Sounds like the 14" MONO ELITE is getting a good run and test and I am pleased you are enjoying the performance...

We are building the initial batch for the Aussie dealers now so we should hit the release date of the 27th April nicely.

If there is a chance, can we use an image or two you have shown here reefdog for our Facebook page to let others know of the results you found.

Please let me know.

Best regards,
Trevor @ Coiltek.
avatar
Coiltek

Posts : 1
Join date : 2015-04-15
Age : 43
Location : Adelaide

http://www.coiltek.com.au

Back to top Go down

Re: New 14" coil

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 3 1, 2, 3  Next

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum