sdc 2300-mods
+4
Twodogs
goldstrijk
nosralt
Admin
8 posters
Page 1 of 1
sdc 2300-mods
the reefdog is working flat out keeping up production with these little add on that work exceptionally well on the 2300 to enhance the volum and the target response..
[You must be registered and logged in to see this image.]
and the xternal speaker blasts away at yah face combined with the B&Z booster..
[You must be registered and logged in to see this image.]
orders taken....
regards
oneday
[You must be registered and logged in to see this image.]
and the xternal speaker blasts away at yah face combined with the B&Z booster..
[You must be registered and logged in to see this image.]
orders taken....
regards
oneday
Re: sdc 2300-mods
Looks good.. what the cost there Ray?
nosralt- Posts : 97
Join date : 2015-03-26
Location : Hedland
Re: sdc 2300-mods
I have basically copied that setup, but have used good quality velcro so it all comes off and it can be folded up again
The B&Z and speaker work brilliantly
Pete
The B&Z and speaker work brilliantly
Pete
goldstrijk- Posts : 13
Join date : 2015-03-27
Age : 70
Location : Yanchep WA
Re: sdc 2300-mods
hi goldstrijk/Pete. Any chance of a pic mate? want to do the same thing as Brownies, but not keen on drilling holes in the thing. Also would like it to still be able to fold up and not sure if it's bolted on if it's still can.
Twodogs- Posts : 10
Join date : 2015-03-26
Re: sdc 2300-mods
No holes to be drilled. Just replace the original ones with same gauge stainless steel self tapping screws that are 10mm longer.
reefdog70- Posts : 20
Join date : 2015-03-26
Location : Dampier
Re: sdc 2300-mods
Yeah Brown dog, now I've got my hands on it I can see the screws. Just want to mount the speaker to the left a little so it still folds up to the compact unit to chuck in a backpack,
Twodogs- Posts : 10
Join date : 2015-03-26
Re: sdc 2300-mods
Reefdog70
the B&Z needs to go on the back of the machine --out of the way and adjust the design of the bracket so it folds down properly..if at all possible.
and get those brackets down to me..
regards
oneday
the B&Z needs to go on the back of the machine --out of the way and adjust the design of the bracket so it folds down properly..if at all possible.
and get those brackets down to me..
regards
oneday
oneday- Admin
- Posts : 1704
Join date : 2015-02-27
Age : 67
Location : karratha
Re: sdc 2300-mods
stay tuned folks if u have a 2300---
some more exciting innovations are heading your way. We have a great bunch of exciting engineers working on this project....well sort of....
a couple of misfits would be more closer to the target.,,
.i think these guys think straighter than the originals.
regards
oneday
some more exciting innovations are heading your way. We have a great bunch of exciting engineers working on this project....well sort of....
a couple of misfits would be more closer to the target.,,
.i think these guys think straighter than the originals.
regards
oneday
oneday- Admin
- Posts : 1704
Join date : 2015-02-27
Age : 67
Location : karratha
Re: sdc 2300-mods
Hi Terry
the xternal speaker with adjustable volume control is $50
the B&Z booster is $150
the bracket plus 2 stainless screws are $25.
hope this helps
regards
oneday
the xternal speaker with adjustable volume control is $50
the B&Z booster is $150
the bracket plus 2 stainless screws are $25.
hope this helps
regards
oneday
oneday- Admin
- Posts : 1704
Join date : 2015-02-27
Age : 67
Location : karratha
Re: sdc 2300-mods
Thanks Ray.
i will give you a call on Thursday.
i will give you a call on Thursday.
nosralt- Posts : 97
Join date : 2015-03-26
Location : Hedland
SDC Mods
For all the ATX knockers just take a look at the SDC. Although this machine obviously finds a lot of small gold there would very few in use that haven'y been modified in some way. Ours was useless without the cable adapter and a decent set of Sun Ray Gold earphones. The noise was uncontrollable. The ATX comes with all the adjustments to have it handle all conditions.
Moneybox- Posts : 86
Join date : 2015-04-01
Age : 70
Location : Capel
Re: sdc 2300-mods
Monebox
I don't know about that, mine hasn't had any mods to it yet and has paid for itself in only a few months.
I'm quite happy with this machine and what it produces for me.
I don't know about that, mine hasn't had any mods to it yet and has paid for itself in only a few months.
I'm quite happy with this machine and what it produces for me.
nosralt- Posts : 97
Join date : 2015-03-26
Location : Hedland
Re: sdc 2300-mods
nosralt wrote:Monebox
I don't know about that, mine hasn't had any mods to it yet and has paid for itself in only a few months.
I'm quite happy with this machine and what it produces for me.
Yes nosralt it must work better in some conditions. I was just put off by it's cranky behavior. We just spent $4000 and simply couldn't use it at all in Hawaii because it was too noisy to use with the earphones and we were too embarrassed to walk a public beach with the constant noise it produced. At least the after market guys were quick to get in on the act to sort it out but that was another $300 on top of an already expensive machine.
Perhaps we're spoiled by first buying the ATX and GMT. I bought it for Sandra for her birthday and all she wanted was her old machine back.
Moneybox- Posts : 86
Join date : 2015-04-01
Age : 70
Location : Capel
Re: sdc 2300-mods
Phil can i ask what sort of detecting did you have in mind for the 2300 in Hawaii ?
Banjo- Posts : 223
Join date : 2015-03-25
Location : Hedland
Re: sdc 2300-mods
Banjo wrote:Phil can i ask what sort of detecting did you have in mind for the 2300 in Hawaii ?
Waikiki Beach where all the rich drop their pants We tried several of the beaches but didn't do very well. We've got a big 50mm gold ear ring but I'm yet to drop into some alibrite to see what happens.
Last edited by Moneybox on Fri 03 Apr 2015, 8:30 pm; edited 1 time in total (Reason for editing : Correction)
Moneybox- Posts : 86
Join date : 2015-04-01
Age : 70
Location : Capel
Similar topics
» new sdc 2300
» SDC 2300 for sale
» SDC 2300 New with--
» souped up 2300
» GPZ plus SDC 2300 package..ALL OVER SORRY
» SDC 2300 for sale
» SDC 2300 New with--
» souped up 2300
» GPZ plus SDC 2300 package..ALL OVER SORRY
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
Tue 17 Dec 2019, 3:33 pm by wandwaver
» GPZ 19” Coil For Sale
Mon 16 Dec 2019, 5:24 am by Matrix
» gold mining site and gold bars to sell
Thu 27 Sep 2018, 2:03 am by johngolden
» G'day everyone
Tue 25 Sep 2018, 8:21 pm by Moneybox
» Kia Ora form Martin
Tue 14 Aug 2018, 4:08 pm by oneday
» New Member
Wed 01 Aug 2018, 9:31 pm by Fluffy
» I need some help with detecting in WA
Mon 23 Jul 2018, 11:15 am by Guest
» SDC2300 reluctant sale
Sat 26 May 2018, 9:21 am by goldfinger
» Gold & Ghosts - Volumes 1&2
Tue 08 May 2018, 5:09 pm by nightjar